1.5kw Frequency Inverter, Single Phase 120V Input, 1ph/3ph 220V Output

$315.38

| 0 review(s) | Add your review

1.5kw frequency drive inverter, single phase 120v input, single phase and three phase 220v output. 2hp variable frequency drive inverter can drive single/three AC motors with 120v power. Rated current 7 A, 50Hz/60Hz input, and V/F control mode. It offers an RS485 communication interface and supports the MODBUS-RTU communication protocol. Come with IP20 protection, the variable frequency inverter works at (–10℃, 40℃). The interior PID controller of the frequency inverter is convenient for making a closed-loop system.

Free shipping

Delivery date: 3-10 days

SKU: EM15-SP1S1-1d5

increase decrease

Overview
Specs
Manual
FAQ
Reviews

Overview

2hp frequency inverters can be used to drive 1ph/3ph AC motor, work at (–10℃, 40℃). With IP20 protection and a force cooling fan, 1.5kw variable drive inverters are usually applied for office, transportation, tourism, and solar power generation. With V/F control and vector control mode, the speed regulation of the frequency inverter reaches 1:100.

Feature

The variable frequency inverter has an MPPT algorithm that can quickly track the maximum power point of the photovoltaic cell, with an efficiency of >99%.
The frequency drive inverter runs automatically around the clock, and can also be completed manually or automatically, realizing "sunrise work, sunset sleep".
Come with 35 protection functions, a variable frequency drive inverter has automatic short circuit detection after power-on, automatic sleep function, pump dry pump protection, low-frequency protection, overload protection, overcurrent protection, overvoltage protection, undervoltage protection, etc.
With remote control, the variable frequency drive inverter supports RS232/RS485 protocol, terminal control, and analog control.

Details

Digital Display

The electronic screen of the 120v input variable frequency inverter displays clear fonts. The indicators of the frequency drive inverter will display the corresponding inverter operating conditions. It can monitor real-time 1.5kw inverter data changes, and improve safety performance.

Multi-function Button

Equipped with multi-function keys, inverter has menu/exit, forward, up/down keys, stop/reset, etc. The functional keys of the 2 hp variable frequency inverters are very convenient for adjusting the 1.5kw operating variable frequency drive inverter parameters and operating status at any time.

Cooling Fan

The cooling fan installed in the 1.5kw frequency inverter 120v input introduces cooling air into the 1.5kw frequency drive inverter, reducing the temperature of the components, protecting the devices from damage, and prolonging the frequency inverter's service life.

Applications

New Energy Power Generation

Solar Power Generation

Home Appliances

Office Equipment

Specs

Basics	Model	EM15-SP1S1-1d5
	Capacity	1.5 kW (2 hp)
	Shipping weight	3 kg
	Dimension (W x H x D)	120205166 mm
I/O Feature	Rated current	7 A
	Input voltage	1 phase 120V AC ±15% (Set FE-00=0)
	Input frequency	50Hz/60Hz
	Output voltage	1 phase or 3 phase 220V AC ±15%
	Output frequency	0~320Hz (SFC)
Control Feature	Control mode	V/F control; vector control
	Communication	Offer RS485 communication interface, support MODBUS-RTU communication protocol
	Speed regulation	1:100
	Start torque	150% of rating torque at 1 Hz
	Speed control accuracy	≤±0.5% of rating synchronous speed
	Frequency precision	Digital setting: max frequency x± 0.01%;
	Frequency precision	Analog setting: max frequency x± 0.2%
	Frequency resolution	Analog setting: 0.1% of max frequency;
	Frequency resolution	Digital setting: 0.01Hz
	Torque boost	Automatic torque boost, manual torque boost 0.1%~30.0%
	Interior PID controller	Be convenient to make closed-loop system
	Automatic energy save running	Optimize V/F curve automatically based on the load to realize power save running
	Automatic voltage regulation (AVR)	Can keep constant output voltage when power source voltage varies.
	Automatic current limiting	Limit running current automatically to avoid frequent over-current which will cause trip
Environment	Enclosure rating	IP 20
	Temperature	–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
	Humidity	smaller than 95%RH, non-condensation
	Altitude	≤1000m; VFD will be derated if above 1000m
	Vibration	Less than 5.9 m/s2 (0.6 g)
	Cooling	forced air cooling
	Store environment	–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Manual

120v Input Frequency Inverter Quick Setting

120v Input Frequency Inverter User Manual

FAQ

What is the speed range of the frequency inverter?

Frequency Range
Standard Frequency Range: Most frequency inverters operate within the range of 0 to 400 Hz.
0 Hz represents a stopped or stationary motor.
50 Hz or 60 Hz is the standard operating frequency for most electric motors in industrial applications, depending on the region (50 Hz for Europe, Asia, etc., and 60 Hz for North America).
400 Hz or higher may be used in specialized applications, such as aerospace or high-speed machinery.
Voltage Range
Frequency drive inverters come in different voltage classes to suit various applications:
Low Voltage (LV) Frequency Inverters:
Single-phase variable frequency inverters: Typically used in residential or light industrial applications. Voltage range: 120V to 240V.
Three-phase variable frequency inverters: Common in industrial settings. Voltage range: 200V to 690V.
Medium Voltage (MV) Frequency Inverters:
Used for heavy-duty industrial motors or large systems. Voltage range: 690V to 3.3kV.
High Voltage (HV) Frequency Inverters:
Used in large industrial processes, such as in mining or utilities. Voltage range: 3.3kV to 13.8kV.
Power Range (in kW or HP)
Frequency inverters are available for motors of varying sizes:
Small frequency inverters for motors under 1 kW (1 HP), are used for small appliances or tools.
Medium frequency inverters for motors from 1 kW to 500 kW (1 HP to 670 HP), are typical in many industrial processes.
Large frequency inverters for motors above 500 kW (670 HP) are used in large industrial applications like pumps, fans, and conveyor systems.

Write your own review

Review title: *

Review text: *

Rating:

1 2 3 4 5