Blog

In the field of renewable energy, solar energy, as a clean and pollution-free form of energy, is gradually becoming a crucial direction for global energy structure transformation. Solar generators, as key equipment for harnessing solar energy, have garnered significant attention regarding their working principles, technological composition, and application areas. This article will explore in-depth the definition, working principles, structural components, technical characteristics, and application prospects of solar generators, aiming to provide a comprehensive and profound understanding.

There's nothing better than watching TV with a cold drink from the fridge in hand, and with solar energy, you can do just that. But how many solar panels do you need to run a TV and a refrigerator at the same time? No doubt it's possible, but how many panels do you need? Do you need batteries?

It's a common misconception that once a solar panel is broken, it can't work, and therefore can't generate any electricity, but this experiment shows that's where the danger begins. How scary are solar panels? We took a damaged components to do the experiment, the photovoltaic modules, dense, crack, there are many staff to solar panels are connected to circuit, damaged the photovoltaic modules output 9 Ann's current, voltage is 650V, it is fatal to human body, and also can produce the same as the flame between positive and negative wire of electric arc.

One of the important ways to support solar panel against water damage is the pitched roof or pitched mounting structure, which your solar installer will take care about when setting up your solar system, surely he will take care of adjusting the solar panel slant, to push rains water out, preventing it from staying on solar panel surface for a long time, so keeping solar panel internal structure safe and without harm. A second way to improve waterproof feature of the solar panel is to raise the waterproof seal (a barrier keeping the water out).

Maximum power tracking MPPT function when the light intensity and temperature changes, the solar module input power presents a linear change, the solar module is not a constant voltage source, nor is it a constant current source, its power will shift with the output voltage shift, and there is no direct relationship with the load. Its output current along with the voltage rise is a horizontal line at first, and when it reaches a certain power, it decreases with the voltage rise, and when it reaches the module open circuit voltage, the current decreases to zero.

The input port and output port of the solar inverter are designed with an EIM filter. The purpose is to control EMI transmission interference and only allow the use of ideal low-pass current at DC and power frequency. In addition, it is a bidirectional filter, which can not only To avoid noise interference from the inverter to the outside world, and to prevent the introduction of external interference into the system, the filter includes X and Y capacitors and common mode inductors. The common mode inductance is on the same magnetic ring, which is composed of two windings with opposite directions and the same number of turns, so that the magnetic field generated when the flow passes through the windings is superimposed, and presents a large inductive reactance to the interference current. Mode interference, the common mode capacitor will introduce the common mode current to the ground without passing through the power grid.

Usually direct current is directly converted into alternating current, and then power is supplied to the device. Electrical appliances that can be used include desk lamps, fans, computers, rice cookers, televisions, refrigerators, washing machines, air conditioners, soybean milk makers, electric kettles, ovens, projectors, and hair dryers, induction cooker and most other household appliances.

Application area: This mode is used in areas with no or less electricity. Mains electricity is expensive and frequent power outages. It is important to note that the inverter will switch to utility power when it needs to use the battery to a lower value. The advantage of this mode is that the solar energy can be fully utilized. The disadvantage is that the user's electricity consumption cannot be fully guaranteed. When the battery voltage is low and the mains is abnormal, no electricity can be used. If the user's demand for electricity is not particularly high, this mode can be selected.

Installing a wind-solar hybrid system is an excellent way to harness renewable energy from both the sun and wind, providing a more consistent and reliable power supply. Here’s a step-by-step guide on how to install a wind-solar hybrid system.

A wind turbine is a power device that converts wind energy into mechanical work, which drives the rotor to rotate, and finally outputs alternating current. The structure of the generator is generally composed of the nacelle, rotor blades, shaft center, high-speed shaft and its mechanical brake, generator, yaw device, electronic controller, hydraulic system, cooling element, tower, anemometer and wind vane, tail rudder. Wind turbines are generally composed of wind turbines, generators (including devices), regulators (tails), towers, speed-limiting safety mechanisms, and energy storage devices.

From the output waveform, the car inverter can be divided into sine wave output and square wave output. The former outputs the same sine wave alternating current as the power grid we use every day, which can adapt to various loads, but the circuit structure is more complicated and the volume is larger. The latter circuit is simple, but it is picky about the load and cannot drive the inductive load.

In modern power systems, off-grid inverters play a crucial role. They not only convert DC power into AC power, providing stable electricity for various loads but also ensure the normal operation of critical equipment during power quality issues or supply interruptions. However, the performance of off-grid inverters is closely related to the type of load, and different types of loads place different demands on the inverters. Today, Inverter.com will delve into the types of loads for off-grid inverters and how these load types impact inverter performance.

A solar panel is a device that absorbs sunlight and converts solar radiation directly or indirectly into electrical energy through the photoelectric effect or photochemical effect. Compared with ordinary batteries and rechargeable batteries, solar batteries are more energy-saving and environmentally friendly.

A solar panel is a device that directly converts light energy into electrical energy through the photoelectric effect or photochemical effect. With the development of solar technology, the application of portable solar panels in our life is more and more extensive. Here are a few things to consider when selecting portable solar panels.

Wind turbine charge controller is an intelligent controller specially designed for wind power generation system. Making full use of wind energy resources to generate electricity, the equipment can not only efficiently convert the electrical energy generated by the wind turbine to charge the battery, but also provide powerful control functions.

For buyers, they don’t know how to determine whether the inverter generator is suitable for their own use. We summarize some points that they need to pay attention to:

A wind turbine first uses wind energy to generate electricity and is a device that converts wind energy into mechanical energy and then into electrical energy. And wind energy, as a clean and renewable energy, is inexhaustible. Therefore, wind power can not only supplement conventional power sources but also be an environmentally friendly energy source.

No matter what kind of tools, there will be a life limit. The service life of wind turbines is usually twenties years. But does this mean that we can use wind turbines without worrying about their maintenance? The answer is negative. Even if the lifespan of a wind turbine is twenties years, we still need to do some regular maintenance. Today we will introduce the basic maintenance of wind turbines.

Regular maintenance of wind turbines is an important part of ensuring their efficient, safe, and stable operation. The main purpose of regular maintenance is to prevent failures. It can extend the life of the equipment, improve power generation efficiency, and ensure that the wind turbines meet safety standards and environmental protection requirements during operation. The following is a detailed explanation of the regular maintenance of wind turbines.

The solar power inverter not only has the function of DC-AC conversion, but also has the function of maximizing the function of solar cells and system maintenance. This article mainly focuses on solar power inverter’s automatic operation and shutdown function and maximum power tracking control function.