Blog

Wind turbine charge controller is an intelligent controller specially designed for wind power generation system. Making full use of wind energy resources to generate electricity, the equipment can not only efficiently convert the electrical energy generated by the wind turbine to charge the battery, but also provide powerful control functions.

For buyers, they don’t know how to determine whether the inverter generator is suitable for their own use. We summarize some points that they need to pay attention to:

A wind turbine first uses wind energy to generate electricity and is a device that converts wind energy into mechanical energy and then into electrical energy. And wind energy, as a clean and renewable energy, is inexhaustible. Therefore, wind power can not only supplement conventional power sources but also be an environmentally friendly energy source.

No matter what kind of tools, there will be a life limit. The service life of wind turbines is usually twenties years. But does this mean that we can use wind turbines without worrying about their maintenance? The answer is negative. Even if the lifespan of a wind turbine is twenties years, we still need to do some regular maintenance. Today we will introduce the basic maintenance of wind turbines.

Regular maintenance of wind turbines is an important part of ensuring their efficient, safe, and stable operation. The main purpose of regular maintenance is to prevent failures. It can extend the life of the equipment, improve power generation efficiency, and ensure that the wind turbines meet safety standards and environmental protection requirements during operation. The following is a detailed explanation of the regular maintenance of wind turbines.

The solar power inverter not only has the function of DC-AC conversion, but also has the function of maximizing the function of solar cells and system maintenance. This article mainly focuses on solar power inverter’s automatic operation and shutdown function and maximum power tracking control function.

Wind turbine is an important equipment in the process of energy conversion. The shaft is a very important part of the wind turbine. The shaft wear of wind turbines is a common problem of this equipment. Once this problem occurs, the user needs to face a series of problems in disassembly, return to the factory, or repair welding. The repair cycle of wind turbine shaft wear is relatively long. Please look at two classic cases of wind turbine shaft wear.

Each item has a different lifespan. How long the service life of wind turbines is, this is also a question that many people want to know. Generally speaking, the service life of wind turbines is more than 20 years. But if we can maintain the wind turbine, its service life can be extended.

The solar charge controller is a device in the solar off-grid independent power supply system that can automatically control multiple solar panels to charge the battery. It coordinates the work of solar panels, batteries, and loads, monitors the charging status, and tells us the current, voltage and battery conditions that the solar panels charge the battery pack. It can effectively prevent battery overcharge, and has anti-reverse and anti-short circuit functions. Inverter.com offers you two kinds of solar charge controllers, Maximum Power Point Tracking (MPPT) controllers and Pulse Width Modulation (PWM) controllers. The following is our solar charge controller price list for your reference. If you want more information, please go to our product's page.

The solar charge controller is an automatic control device used in the solar power generation system to control the multi-channel solar cell array to charge the battery. It regulates and controls the charging and discharging conditions of the battery, and controls the power output of the solar cell components and the battery to the load according to the power demand of the load. It is the core control part of the entire photovoltaic power supply system.

Solar water pumps are commonly used in residential and commercial applications. They are a clean alternative to fossil fuel powered windmills and generators. There are two main types of solar water pumps, surface pumps and submersible pumps. Surface pumps are located on the ground and move water through pipes, which can move large quantities of water slowly.

In remote areas with scarce water resources, traditional grid installations are not only costly but also often fail to reach all corners where power is needed. These regions are often important agricultural bases, but due to insufficient power supply, irrigation efficiency is low, severely impacting crop yield and quality. The emergence of solar water lifting systems addresses these challenges by ingeniously converting solar energy into mechanical energy to drive water pumps. This enables efficient water extraction in off-grid environments, providing strong support for residents' domestic water needs, agricultural irrigation, ecological restoration, and even the development of pastoral livestock farming.

Solar water pump (also known as photovoltaic water pump) is mainly composed of photovoltaic pumping inverters, water pumps and solar panels. It is a powerful water supply method in remote areas with little electricity. Utilizing the inexhaustible solar energy that can be obtained everywhere, the system automatically works at sunrise and rests at sunset, without the need for guards and excessive maintenance. It is an ideal green energy water extraction system integrating economy, reliability and environmental protection benefits.

The pure sine wave inverter is a device that can invert the DC power of the battery into a sine wave AC power with a rated voltage output for the user's load. 12/24/48V pure sine wave inverter is suitable for home appliance equipment, air conditioning equipment, single-phase power equipment, industrial equipment, etc.

The pure sine wave inverter does not have the problem of electromagnetic pollution in the power grid, and the output is the same pure sine wave alternating current as the mains. It has stronger load capacity, can carry the inductive load and any type of general-purpose AC load, has low noise with inductive load, and has no effect on the performance and life of the load. In contemporary times, we now need a large amount of power supply, and the convenience brought to us by pure sine wave inverters is obvious. Protection devices make us safer when using electricity.

With the rapid development of renewable energy technology, solar energy, as a clean and renewable energy source, is gaining increasing popularity. In solar power generation systems, off-grid inverters serve as critical components, with their performance directly impacting the overall system's efficiency and stability. This article will delve into the topic of "How to test off-grid solar inverters," exploring the working principles, schematic diagrams, and testing procedures for off-grid inverters. 

Using solar panels to electrically feed our loads will greatly reduce carbon emission, and reduce the rely on electric utility, so save us much money by cutting our monthly utility bill. In winter, our solar panels will get lesser direct sun light, and sometimes they will be covered by snow, so the question is; Will this affect solar panels badly?

Solar panel is the main element in the solar photovoltaic system, because it takes the main role of converting solar light to direct current electricity. Almost all solar panels manufactures provide the same solar panels dimensions, but the weight will differ from one manufacturer/brand to another. Actually, when installing the solar panels on the roof, we have to take care about their total weight, because if they are so heavy, then they will badly affect the roof structural over the time.

The solar panels are required for communities who are looking forward to keep the environment clean without pollution, and to save energy costs. Actually, the solar panel is large in size, so we have to have lot of space on our building roof to install them. There are many different power capacities of the solar panel in the market, but the most dominant capacity is 350 watts, which has approximate length of 5 feet and five inch and approximate width of 3 feet, so it around 16.5 square feet.

The solar panels will generate DC electricity once the sun hits their surfaces, but they do not store electricity, they need batteries to store such generated electricity inside. The solar panels are manufactured from semiconductor materials like silicon, and they produce DC electricity through a process called photovoltaic. Under photovoltaic process, the semiconductor materials will exposure when the sunlight hit it, so the DC current will be generated.