Solar Wire Connector, Y Branch 3 to 1

How to correctly install the solar photovoltaic panel connector?

Cable preparation and connection

1. Wire stripping:
   Use wire strippers to strip the cable sheath to expose a certain length of wire. Make sure the stripping length is moderate, not too long or too short, so as not to affect the fixation and conductivity of the connector.
2. Insert the connector:
   Insert the stripped cable wire into the corresponding jack of the connector.
   Make sure the wire is inserted in place without looseness or skewness.
3. Fix the cable:
   Use screws and nuts to fix the cable to the connector to ensure a firm and reliable connection.
   During the fixing process, be careful not to damage the wire or insulation layer of the cable.

Connect the connector to the photovoltaic panel

1. Determine the connection position:
   Determine the layout of the connector according to the layout and installation position of the photovoltaic panel.
   Make sure the corresponding interface of the connector and the photovoltaic panel is correct.
2. Insert the connector:
   Insert the plug part of the connector into the interface of the photovoltaic panel.
   Make sure the insertion is firm to avoid loosening or falling off. The design of the connector usually has an anti-reverse insertion function, and ensure that it is inserted correctly.